How to build pytorch without AVX?

I want to run torch 1.11.0 on old machine equipped by AMD Phenom II N850 (no AVX / AVX2 / AVX 512). So, i decide to build torch from sources:

wget && \
tar -xvzf pytorch-v1.11.0.tar.gz && rm pytorch-v1.11.0.tar.gz && \
cd pytorch-v1.11.0 && mkdir build && cd build && \
cmake -D CMAKE_BUILD_TYPE=Release \
      -D C_HAS_AVX_2=OFF \
      -D C_HAS_AVX2_2=OFF \
      -D CXX_HAS_AVX_2=OFF \
      -D CXX_HAS_AVX2_2=OFF \
      .. && \
make -j4 && \
sudo make install && \
sudo ldconfig

Building process successfully finishes. But in my test application, however, when inferences should be done, application crashes with OS-message:

Illegal instruction (core dumped)

So, what i am doing wrong? It seems fro me, that I do not properly disable all AVX-specfic flags at build time. Please help.

AMD Phenom II N850 specs, as reported by OS:

Architecture:        x86_64
CPU op-mode(s):      32-bit, 64-bit
Byte Order:          Little Endian
CPU(s):              3
On-line CPU(s) list: 0-2
Thread(s) per core:  1
Core(s) per socket:  3
Socket(s):           1
NUMA node(s):        1
Vendor ID:           AuthenticAMD
CPU family:          16
Model:               5
Model name:          AMD Phenom(tm) II N850 Triple-Core Processor
Stepping:            3
CPU MHz:             800.000
CPU max MHz:         2200,0000
CPU min MHz:         800,0000
BogoMIPS:            4389.27
Virtualization:      AMD-V
L1d cache:           64K
L1i cache:           64K
L2 cache:            512K
NUMA node0 CPU(s):   0-2
Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt nodeid_msr hw_pstate vmmcall npt lbrv svm_lock nrip_save

Finally I have found set of flags, that allows me to properly build torch for my hardware. So, I want to share with the community:

cmake -D CMAKE_BUILD_TYPE=Release \
      -D USE_AVX=OFF \
      -D C_HAS_AVX_2=OFF \
      -D C_HAS_AVX2_2=OFF \
      -D CXX_HAS_AVX_2=OFF \
      -D CXX_HAS_AVX2_2=OFF \
1 Like